ÄMNE:

Det kostar att ligga på topp...

Come on Malte show us more pictures of the building.. As it´s almost ready now..

today, i start working on the engine, I have make a 100.25 cylinderblock, as I will use the 100.19 mm ROTAX RACING factory pistons, ( that pistons are available for puplic, price 9600 SEK 3 pistons incl piston pin ) the pistons are forged lightweight and have a compression ratio 9:1 manufactured by MAHLE.

the balancershaft is lightweight as well, from ROTAX RACING 5800 SEK, but a local machineshop can do the work as well

next to the balancershaft, you can also see the ROTAX RACING lightweight CAM timming gear

all parts are also used on the rotax racing factory engine (Lemoine, Zapata)

the stock crankshaft has been micro polished by a motorshop in Gotheborg

DSC01943 (Large).JPG

Finally we get to see some pictures of the build, how fast will this boat be?

as it will be a CC boat, we use a big 160 mm set back Impeller with a small pitch 13/18.5 @ 9100 RPM around 70-71 knot , the boat will not be setup for topspeed

the engine is mounted for test setup, i m working now on the exhaust and waterbox setup, the waterbox is a modify 2009 RXP/X waterbox, with custom down pipeDSC01953.jpg

Looks very good Malte!
Nice to follow a pure raceski project! I like the clean look of the engineroom so far, as it should be!:clap: :clap:
What ECU/harness setup will it be?

Keep the pictures coming!

the project is successfull done, accelleration and topspeed is absolute unreal

i had to change the prop 2 times, to get the bot from the 9000 RPM Limiter

now max RPM is 8860 with extrem pull in the midrange, I m using the Impeller of the Dark Dog turbo RXP now, and I reach 120 RPM more the the urbo rxp,DSC09943.jpg

Looks very good Malte!

Very nice Malte, looks fantastic.